What should I do if the wheels of the swivel chair are damaged?

1、 Rotating chair wheel components

Firstly, it is necessary to understand the components of a swivel chair. Currently, the general components of a swivel chair on the market include casters, chair legs, air rods, chassis, seat, armrests, back seat links, waist pillows, headrests, etc.

2、 Operating principle of swivel chair wheels

It is not enough to only understand the components of the swivel chair, but also to understand its operating principle. The reason why the swivel chair can be lifted and lowered is because there is an air pressure rod in the lifting device. The air pressure rod is an elastic component that uses gas and liquid as the working medium and can play functions such as support, buffering, braking, height adjustment, and angle adjustment. The elasticity of the air pressure rod, when a person sits on it and applies pressure to the lifting shaft, the lifting shaft slowly descends at a uniform speed and can reach the lowest point. Without external force on the lifting shaft, the lifting shaft rises back to its highest point. 3、 Rotary chair wheel maintenance

1. Removing the base

1) The office swivel chair is on a flat surface and ensures that it is in a horizontal position.

2) Remove the fastening clip from the bottom of the seat. If the foundation of the fixed bolt or nut is fixed, it can be loosened and removed with a suitable wrench.

2. Check the seats

1) Check if the seat is damaged and if there are any parts that may need to be replaced internally.

2) If there are other damaged components outside of the cylinder, ensure that the correct replacement parts are used.

3. Delete existing cylinders

Put on the cylinder clamp, open it, and release the cylinder until it easily falls off. Please be careful not to forcefully pull during this process, as it may damage other components on the chair.

The above is the maintenance method for the swivel chair wheel, which is not difficult. However, although the swivel chair wheel is a small component, there are not many parts involved, so it is necessary for the masters to be careful in order to obtain good results.